Des conditions du procédé au bon instrument
Comprenez les principes de mesure, vérifiez les conditions du procédé, configurez les produits et conservez vos ressources techniques.

La version française n’est pas encore disponible. La version complète en anglais est présentée ci-dessous.

← Retour à la base de connaissances
Sélection et applications3 min de lectureLangue du contenu: anglaisMis à jour 23 octobre 2026

What cable checks matter for a remote electromagnetic flowmeter?

Electrode and excitation circuits have separate cable requirements. Substituting an ordinary cable can introduce noise or electrical leakage.

Check the two circuits separately

Electrode and excitation circuits have separate cable requirements. Substituting an ordinary cable can introduce noise or electrical leakage.

Electrode cable insulation, shielding and moisture at terminations can affect the weak signal. Apply the separate electrical checks specified for the excitation circuit.

Trace the disturbance to its source

Compare the timing of the disturbance with power equipment starting and stopping. Then inspect the wiring and the reference connection. Cable shielding, protective earthing and the signal reference serve different purposes. Follow the installation design. Adding arbitrary connections may create loops, even when the noise briefly decreases.

Verify permitted cable length and shield termination for the model. Review weak-signal wiring, power, protective earthing and the signal reference separately. Compare faults with equipment operation and weather, then inspect the actual cable route, terminations and connectors. Intermittent moisture faults may disappear temporarily after disassembly. Adding ground points or blocking a reference path can introduce new faults.

Checks on site

  • Check the model’s cable length and shield termination requirements. Record flow, electrode and empty-pipe diagnostics when available. Identify which readings were measured and which functions the instrument actually supports.
  • Mark reference points, sensitive areas and nearby structures on the installation drawing. Record actual dimensions where the remote cable passes them.
  • Compare cable length and shield termination before and after the check against a suitable installation reference. Keep the original wiring and operating conditions on record. Modify one factor at a time based on the evidence.

Example: mains-frequency noise after extending the cable

Suppose a remote installation develops mains-frequency noise after the cable is extended. If the noise worsens after rain and disappears after drying, inspect the terminations and insulation before considering a zero adjustment.

Mark the result on the installation section drawing to distinguish effects of routing, orientation and connection.

Record the actual wiring and the verified result

Support your conclusion with the allowed cable length, the actual run and the shield termination. Record the conditions tested, the comparison basis and any open questions. Retain the original cable configuration. A test that simulates only the output cannot verify the cable or other parts it bypasses.

This is an illustrative case. Follow the limits of the installed model and the site procedures. Use Doweston’s supply documents to confirm equipment specifications and certification.

Appliquez ces connaissances à la sélection

Clients et achats

Vérifiez les conditions réelles et les critères de réception dans l’article et la documentation du produit. Soumettez les points ouverts au service technique DOWESTON.

Équipes commerciales et techniques

Notez les questions du client et ses conditions de service. Vérifiez la plage, les raccordements et les conditions d’utilisation dans la documentation du modèle sélectionné.

Transformez les questions en critères de sélection

Relevez le fluide, les raccordements, le montage et les critères de réception du produit, puis examinez les points ouverts avec DOWESTON.

Choisir un produit et préparer les conditions de service
Pas encore connecté à DOWESTON ?
Créez un compte pour commencer la sélection, consulter les prix et recevoir notre lettre d'information sur les dernières nouveautés.
Produits et services
Doweston propose une gamme de services pour vous aider à construire rapidement vos systèmes d'instrumentation automatisés. Contactez-nous pour en savoir plus.
Prêt à acheter ?
Si vous souhaitez acheter des produits,
contactez simplement notre équipe commerciale — nous serons ravis de vous aider.
Qui sommes-nous
DOWESTON fournit des solutions de mesure précises et fiables
— des produits de détection et de capteurs fiables dans tous les domaines !
Une demande de service ?
Si vous souhaitez optimiser votre production et réduire les arrêts,
nous pouvons vous aider à choisir les pièces de rechange et les services adaptés.
Modifier la configuration

Nom du produit

Marque

Modèle

Confirmer les modifications Annuler
Votre écran est peut-être trop petit pour une navigation optimale.
Nous vous recommandons de continuer sur un ordinateur,
ou contactez immédiatement un ingénieur pour votre sélection !
Service plus rapide ? Appelez le
400-888-4436
Continuer la navigation