Parta de su proceso y encuentre el instrumento adecuado
Aprenda los principios de medición, compruebe las condiciones del proceso, configure productos y guarde recursos técnicos.

La edición en español aún no está disponible. A continuación se muestra la versión completa en inglés.

← Volver a la base de conocimientos
Selección y aplicaciones3 min de lecturaIdioma del contenido: inglésActualizado 23 de octubre de 2026

What cable checks matter for a remote electromagnetic flowmeter?

Electrode and excitation circuits have separate cable requirements. Substituting an ordinary cable can introduce noise or electrical leakage.

Check the two circuits separately

Electrode and excitation circuits have separate cable requirements. Substituting an ordinary cable can introduce noise or electrical leakage.

Electrode cable insulation, shielding and moisture at terminations can affect the weak signal. Apply the separate electrical checks specified for the excitation circuit.

Trace the disturbance to its source

Compare the timing of the disturbance with power equipment starting and stopping. Then inspect the wiring and the reference connection. Cable shielding, protective earthing and the signal reference serve different purposes. Follow the installation design. Adding arbitrary connections may create loops, even when the noise briefly decreases.

Verify permitted cable length and shield termination for the model. Review weak-signal wiring, power, protective earthing and the signal reference separately. Compare faults with equipment operation and weather, then inspect the actual cable route, terminations and connectors. Intermittent moisture faults may disappear temporarily after disassembly. Adding ground points or blocking a reference path can introduce new faults.

Checks on site

  • Check the model’s cable length and shield termination requirements. Record flow, electrode and empty-pipe diagnostics when available. Identify which readings were measured and which functions the instrument actually supports.
  • Mark reference points, sensitive areas and nearby structures on the installation drawing. Record actual dimensions where the remote cable passes them.
  • Compare cable length and shield termination before and after the check against a suitable installation reference. Keep the original wiring and operating conditions on record. Modify one factor at a time based on the evidence.

Example: mains-frequency noise after extending the cable

Suppose a remote installation develops mains-frequency noise after the cable is extended. If the noise worsens after rain and disappears after drying, inspect the terminations and insulation before considering a zero adjustment.

Mark the result on the installation section drawing to distinguish effects of routing, orientation and connection.

Record the actual wiring and the verified result

Support your conclusion with the allowed cable length, the actual run and the shield termination. Record the conditions tested, the comparison basis and any open questions. Retain the original cable configuration. A test that simulates only the output cannot verify the cable or other parts it bypasses.

This is an illustrative case. Follow the limits of the installed model and the site procedures. Use Doweston’s supply documents to confirm equipment specifications and certification.

Aplique estos conocimientos a la selección

Clientes y compras

Compruebe las condiciones reales y los criterios de aceptación con el artículo y la documentación del producto. Envíe las cuestiones pendientes al servicio técnico de DOWESTON.

Equipos comerciales y técnicos

Anote las preguntas del cliente y sus condiciones de servicio. Compruebe el rango, las conexiones y las condiciones de uso en la documentación del modelo seleccionado.

Convierta las preguntas en criterios de selección

Reúna los datos del fluido, las conexiones, la instalación y los criterios de aceptación del producto, y revise los puntos pendientes con DOWESTON.

Elegir un producto y preparar las condiciones de servicio
¿Aún no ha iniciado sesión en DOWESTON?
Cree una cuenta para empezar a seleccionar, consultar precios y recibir nuestro boletín con las últimas novedades.
Productos y servicios
Doweston ofrece una gama de servicios para ayudarle a construir rápidamente sistemas de instrumentación automatizada. Contáctenos para más información.
¿Listo para comprar?
Si desea comprar productos,
solo contacte con nuestro equipo de ventas — estaremos encantados de ayudarle.
Quiénes somos
DOWESTON ofrece soluciones de medición precisas y fiables
¡productos de detección y sensores fiables para todos los sectores!
¿Necesita servicio?
Si desea optimizar la producción y reducir los parones,
podemos ayudarle a elegir las piezas de repuesto y los productos de servicio adecuados.
Editar configuración

Nombre del producto

Marca

Modelo

Confirmar cambios Cancelar
Su pantalla puede ser demasiado pequeña para una mejor experiencia.
Le recomendamos continuar en un ordenador,
¡o contacte de inmediato con un ingeniero para su selección!
¿Servicio más rápido? Llame al
400-888-4436
Seguir navegando