Parta de su proceso y encuentre el instrumento adecuado
Aprenda los principios de medición, compruebe las condiciones del proceso, configure productos y guarde recursos técnicos.

La edición en español aún no está disponible. A continuación se muestra la versión completa en inglés.

← Volver a la base de conocimientos
Principios de medición5 min de lecturaIdioma del contenido: inglésActualizado 23 de octubre de 2026

Pressure sensors, sensing elements and pressure transmitters: how do you tell them apart when buying?

Before ordering, confirm whether the supplier is delivering a complete device ready to wire or a sensing element that needs further design work.

Start with the scope of supply

A pressure sensor converts pressure into an electrical signal. Suppliers do not use the terms sensor and transmitter consistently. A product sold as a pressure sensor may offer only a millivolt bridge output, or it may already include amplification, compensation, protection circuitry and an industrial connector. Similar names can conceal very different installation and signal acquisition requirements.

Check the interfaces for compatibility

When connecting to existing equipment, check the output type, supply voltage range, wiring arrangement, pressure connection and electrical connection. Do not connect a bare sensing element intended for development directly to a PLC analog input. Similar housings do not establish that two complete devices are interchangeable. Confirm separately any required local display, switching or communications functions.

Put your requirements in a supply checklist

Send Doweston the process medium, pressure range, receiving equipment input type, available power supply and photographs of the connections. Specify whether the request is for a complete replacement or for OEM development. When confirming a quotation, list whether the plug, cable, seals and calibration documents are included so procurement, installation and commissioning teams agree on the scope of supply.

On-site check: identify the level of integration you are buying

  • State whether the supplier will deliver a bare sensing element, a module with circuitry or a complete packaged device. Include the full model and version rather than just the generic name.
  • Check whether the output is already amplified and temperature-compensated. Confirm that its signal and terminals match the receiving equipment.
  • Assign responsibility for the pressure connection, electrical plug and signal interface circuitry separately. List what the customer needs to design or purchase.
  • Agree who will calibrate the complete device, test sealing and commission the system. Specify whether the report covers the device itself or the entire measurement chain.

Example: two quotations use the same name but deliver different products

Suppose a customer receives two quotations both labeled pressure sensor. One covers a bare element with a bridge output. The other covers a complete device with an industrial output and connector. The price of the first item is lower, but it leaves the customer to provide excitation, amplification, compensation, sealing and calibration. Comparing item prices alone will not show the system cost. Put that work and the cost of development and validation on the same checklist.

Sales should ask what originally acquired the signal, whether the supporting circuitry already exists and whether this is a production development project or a maintenance replacement. If the customer is replacing a failed part during downtime, a compatible complete device and clear wiring instructions may be more important. If the customer has development capability, discuss what the module needs to include. This is an illustrative case, not a statement about the scope of supply of any current Doweston model.

Aplique estos conocimientos a la selección

Clientes y compras

Compruebe las condiciones reales y los criterios de aceptación con el artículo y la documentación del producto. Envíe las cuestiones pendientes al servicio técnico de DOWESTON.

Equipos comerciales y técnicos

Anote las preguntas del cliente y sus condiciones de servicio. Compruebe el rango, las conexiones y las condiciones de uso en la documentación del modelo seleccionado.

Convierta las preguntas en criterios de selección

Reúna los datos del fluido, las conexiones, la instalación y los criterios de aceptación del producto, y revise los puntos pendientes con DOWESTON.

Elegir un producto y preparar las condiciones de servicio
¿Aún no ha iniciado sesión en DOWESTON?
Cree una cuenta para empezar a seleccionar, consultar precios y recibir nuestro boletín con las últimas novedades.
Productos y servicios
Doweston ofrece una gama de servicios para ayudarle a construir rápidamente sistemas de instrumentación automatizada. Contáctenos para más información.
¿Listo para comprar?
Si desea comprar productos,
solo contacte con nuestro equipo de ventas — estaremos encantados de ayudarle.
Quiénes somos
DOWESTON ofrece soluciones de medición precisas y fiables
¡productos de detección y sensores fiables para todos los sectores!
¿Necesita servicio?
Si desea optimizar la producción y reducir los parones,
podemos ayudarle a elegir las piezas de repuesto y los productos de servicio adecuados.
Editar configuración

Nombre del producto

Marca

Modelo

Confirmar cambios Cancelar
Su pantalla puede ser demasiado pequeña para una mejor experiencia.
Le recomendamos continuar en un ordenador,
¡o contacte de inmediato con un ingeniero para su selección!
¿Servicio más rápido? Llame al
400-888-4436
Seguir navegando